DOE Logo
NETL Logo
EDX Logo

Find a detailed list of Offshore publications below.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Dalton, L., Brown, S., Moore, J., Crandall, D., Gill, M., Laboratory Foamed-Cement-Curing Evolution using CT Scanning: Insights From Elevated-Pressure Generation. March 2019, SPE Drilling & Completion.

Task 3.0 Assessing Current and Future Infrastructure Hazards
Previously Task 3.0 Intelligent Risk Modeling System for Offshore Subsurface Hazards, Materials & Metocean Systems

Gough, M. K.; Beron-Vera, F. J.; Olascoaga, M. J.; Sheinbaum, J.; Jouanno, J.; Duran, R. Persistent Lagrangian Transport Patterns in the Northwestern Gulf of Mexico. Journal of Physical Oceanography 2019, 49, 353–367.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Duran, R.; Beron-Vera, F. J.; Olascoaga, M. J. Extracting quasi-Steady Lagrangian transport patterns from the ocean circulation: An application to the Gulf of MexicoScientific Reports 2018, 8, 10. DOI:10.1038/s41598-018-23121-y.

Duran, R.; Romeo, L.; Whiting, J.; Vielma, J.; Rose, K.; Bunn, A.; Bauer, J. Simulation of the 2003 Foss Barge – Point Wells Oil Spill:  A Comparison between BLOSOM and GNOME Oil Spill ModelsJournal of Marine Science and Engineering 2018, 6, 3. DOI: 10.3390/jmse6030104.

Feng, R.; Beck, J. R.; Hall, D. M.; Buyuksagis, A.; Ziomek-Moroz, M.; Lvov, S. N. Effects of CO2 and H2S on Corrosion of Martensitic Steels in Brines at Low Temperature. Corrosion 2018, 74, 276–287.

Krishnamurthy, N.; Maddali, S.; Verma, A.; Bruckman, L.; Carter, J.; French, R.; Romanov, V.; Hawk, J. A. Data Analytics for Alloy Qualification; NETL-PUB-21550; U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA, March 2018.

Mark-Moser, M.; Miller, R.; Rose, K.; Bauer, J.; Disenhof, C. Detailed Analysis of Geospatial Trends of Hydrocarbon Accumulations, Offshore Gulf of Mexico; NETL-TRS-13-2018; NETL Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2018; p 108. DOI: 10.18141/1461471.

Nelson, J. R.; Grubesic, T. H.; Sim, L.; Rose, K. A geospatial evaluation of oil spill impact potential on coastal tourism in the Gulf of MexicoComputers, Environment and Urban Systems 2018, 68, 26–36.

Thimmisetty, C.; Aminzadeh, F.; Rose, K.; Ghanem, R. Multiscale Stochastic Representations Using Polynomial Chaos Expansions with Gaussian Process CoefficientsData-Enabled Discovery and Applications 2018, 2, 16.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Mollot, D.; Cedro, V.; Hawk, J. A.; Conrad, R.; Alman, D. E.; Powell, C. Rapid Design, Development and Deployment of Materials for Extreme Environments. Proceedings of the 2017 TechConnect World Innovation Conference & Expo, National Harbor, MD, May 14–17, 2017; pp. 367–370.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Baled, O. H.; Koronaios, P.; Xing, D.; Miles, R.; Tapriyal, D.; Gamwo, I. K.; Newkirk, M. S.; Mallepally, R. R.; McHugh, M.; Enick, M. R. High-temperature, high-pressure viscosity of n-octane and isooctaneFuel 2016, 164, 199.

Baled, O. H.; Tapriyal, D.; Gamwo, I. K.; Bamgbade, A. B.; McHugh, A. M.; Enick, M. R. Viscosity Measurements of Two Potential Deepwater Viscosity Standard Reference Fluids at High Temperature and High PressureJ. Chem. Eng. Data 2016, 61, 2712–2719.

Duran, R. Sub-Grid Parameterizations for Oceanic Oil-Spill Simulations; NETL-TRS-9-2016; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2016; p 36.

Montero, Jose & A. Chesney, Tanya & R. Bauer, Jennifer & Froeschke, John & Graham, Jim. (2016). Brown shrimp (Farfantepenaeus aztecus) density distribution in the Northern Gulf of Mexico: An approach using boosted regression trees. Fisheries Oceanography. 25. 337-348.

Improved Science-Base for Materials & Wellbore Integrity

Beck, J.; Fung, R.; Hall, D.; Buyuksagis, A.; Ziomek-Moroz, M.; Lvov, S. Effects of H2S and CO2 on Cement/Casing Interface Corrosion Integrity for Cold Climate Oil and Gas Well ApplicationsElectrochemical Society Transactions 2016, 72, 107–122.

Feng, R.; Beck, J. R.; Ziomek-Moroz, M.; Lvov, S. Electrochemical Corrosion of Ultra-High Strength Carbon Steel in Alkaline Brines Containing Hydrogen SulfideElectrochimica Acta 2016, 212, 998–1009.

Glosser, D.; Kutchko, B.; Benge, G.; Crandall D.; Ley, M. T. Relationship Between Operational Variables, Fundamental Physics and Foamed Cement Properties in Lab and Field Generated Foamed Cement SlurriesJournal of Petroleum Science and Engineering 2016, 145, 66–76.

Thodla, R.; Cao, L.; Hawk, J.; Ziomek-Moroz, M. Relationship between Localized Corrosion and Stress Corrosion Cracking of Nickel Based Alloys in HPHT Oil and Gas Environments; Paper No. 7113; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Thodla, R.; Cao, L.; Hawk, J.; Ziomek-Moroz, M. Sour Service Fatigue and Fracture Behavior of High Strength Steels; Paper No. 7183; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Ziomek-Moroz, M.; Feng, R.; Beck, J. R.; Hall, D. M.; Buyuksagis, A.; Lvov, S. N. Effects of CO2 and H2S on Corrosion of Martensitic Steels in NaCl at Low Temperature; Paper No. 7659; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Ziomek-Moroz, M.; Feng, R.; Beck, J. R.; Hall, D. M.; Wolfe, I.; Buyuksagis, A.; Lvov, S. N. Corrosion Behavior of Ultra-high Strength Drilling Steel in Alkaline Brines Containing Hydrogen Sulfide at High Temperature; Paper No. 7657; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Improved Science-Base for Materials & Wellbore Integrity

Beck, J.; Fung, R.; Hall, D.; Buyuksagis, A.; Ziomek-Moroz, M.; Lvov, S. Effects of H2S and CO2 on Cement/Casing Interface Corrosion Integrity for Cold Climate Oil and Gas Well ApplicationsElectrochemical Society Transactions 2016, 72, 107–122.

Carson, C.; Levine, J. The Finite Body Triangulation: Algorithms, Subgraphs, Homogeneity Estimation and ApplicationJournal of Microscopy 2016, 263, 268–279.

Feng, R.; Beck, J. R.; Ziomek-Moroz, M.; Lvov, S. Electrochemical Corrosion of Ultra-High Strength Carbon Steel in Alkaline Brines Containing Hydrogen SulfideElectrochimica Acta 2016, 212, 998–1009.

Glosser, D.; Kutchko, B.; Benge, G.; Crandall D.; Ley, M. T. Relationship Between Operational Variables, Fundamental Physics and Foamed Cement Properties in Lab and Field Generated Foamed Cement SlurriesJournal of Petroleum Science and Engineering 2016, 145, 66–76.

Thodla, R.; Cao, L.; Hawk, J.; Ziomek-Moroz, M. Relationship between Localized Corrosion and Stress Corrosion Cracking of Nickel Based Alloys in HPHT Oil and Gas Environments; Paper No. 7113; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Thodla, R.; Cao, L.; Hawk, J.; Ziomek-Moroz, M. Sour Service Fatigue and Fracture Behavior of High Strength Steels; Paper No. 7183; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Ziomek-Moroz, M.; Feng, R.; Beck, J. R.; Hall, D. M.; Buyuksagis, A.; Lvov, S. N. Effects of CO2 and H2S on Corrosion of Martensitic Steels in NaCl at Low Temperature; Paper No. 7659; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Ziomek-Moroz, M.; Feng, R.; Beck, J. R.; Hall, D. M.; Wolfe, I.; Buyuksagis, A.; Lvov, S. N. Corrosion Behavior of Ultra-high Strength Drilling Steel in Alkaline Brines Containing Hydrogen Sulfide at High Temperature; Paper No. 7657; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Bamgbade, A. B.; Wu, Y.; Burgess, A. W.; Tapriyal, D.; Gamwo, I.; Baled, O. H.; Enick, M. R.; McHugh, A. M. High-Temperature, High-Pressure Volumetric Properties of Propane, Squalane, and Their Mixtures: Measurement and PC-SAFT ModelingInd. Eng. Chem. Res.2015, 54, 6804–6811.

Bamgbade, A. B.; Wu, Y.; Burgess, A. W.; Tapriyal, D.; Gamwo, I.; Baled, O. H.; Enick, M. R.; McHugh, A. M. Measurements and Modeling of High-Temperature, High-Pressure Density for Binary Mixtures of Propane with N-Decane and Propane with N-EicosaneJ. Chem. Thermodynamics 2015,84, 108–117.

Bauer, J. R.; Nelson, J.; Romeo, L.; Eynard, J.; Sim, L.; Halama, J.; Rose, K.; Graham, J. A Spatio-Temporal Approach to Analyze Broad Risks and Potential Impacts Associated with Uncontrolled Hydrocarbon Release Events in the Offshore Gulf of Mexico; NETL-TRS-2-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2015; p 60.

Bauer, J.; Rose, K. Variable Grid Method: an Intuitive Approach for Simultaneously Quantifying and Visualizing Spatial Data and Uncertainty. Transactions in GIS 2015, 19, 377–397.

Mark-Moser, M.; Disenhof, C.; Rose, K. Gulf of Mexico Geology and Petroleum System: Overview and Literature Review in Support of Risk and Resource Assessments; NETL-TRS-4-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2015; p 28.

Nelson, J. R.; Grubesic, T. H.; Sim, L.; Rose, K.; Graham, J. Approach for Assessing Coastal Vulnerability to Oil Spills for Prevention and Readiness Using GIS and the Blowout and Spill Occurrence Model (BLOSOM)Ocean & Coastal Management 2015, 112, 1–11.

Romeo, L.; Rose, K.; Bauer, J. R.; Disenhof, C.; Sim, L.; Nelson, J.; Thimmisetty, C.; Mark-Moser, M.; Barkhurst, A. Adapting the National Energy Technology Laboratory’s Offshore Integrated Assessment Modeling Approach for the Offshore Arctic; NETL-TRS-3-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2015; p 40.

Sim, L.; Graham, J.; Rose, K.; Duran, R.; Nelson, J.; Umhoefer, J.; Vielma, J. Developing a Comprehensive Deepwater Blowout and Spill Model; NETL-TRS-9-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2015; p 44.

Socolofsky, S. A.; Adams, E. E.; Boufadel, M. C.; Aman, Z. M.; Johansen, Ø.; Konkel, W. J.; Lindo, D.; Mads, M. N.; North, E. W.; Paris-Limouzy, C. B.; Rasmussen, D.; Reed, M.; Rønningen, P.; Sim, L. H.; Uhrenholdt, T.; Anderson, K. G.; Cooper, C.; Nedwed, T. J. Intercomparison of Oil Spill Prediction Models for Accidental Blowout Scenarios with and without Subsea Chemical Dispersant Injection. Marine Pollution Bulletin2015, 96, 110–126.

Improved Science-Base for Materials & Wellbore Integrity

Chen, T.; Nutter, J.; Hawk, J. A.; Liu, X. Corrosion Fatigue Crack Propagation of Oil-grade Nickel-base Alloy 718. Part 2: Effect of Aging TreatmentCorros. Sci. 2015, 98, 280–290.

Chen, Ting & John, Hendrik & Xu, Jing & Lu, Qiu & Hawk, Jeffrey & Liu, Xingbo. (2014). Influence of surface modifications on pitting corrosion behavior of nickel-base alloy 718. Part 2: Effect of aging treatment. Corrosion Science. 78. 151–161.

Feng, R.; Beck, J. R.; Hall, D.; Ziomek-Moroz, M.; Lvov, S. N. Corrosion Behavior of 13Cr Casing Steel in Cement-Synthetic Pore Solution Exposed to High Pressure CO2 and H2SElectrochemical Society Transactions 2015, 69, 27–40.

Kutchko, B.; Crandall, D.; Moore, J.; Gieger, C.; Gill, M.; Haljasmaa, I.; Spaulinding, R.; Harbert, W.; Mergaman, A.; Dalton, L.; Rosenbaum, E.; McIntyre, D.; Benge, G.; Buford, C.; Shine, J. Assessment of Field-Generated Foamed Cement; OTC-25994-MS; Offshore Technology Conference, Houston, TX, May 4-7, 2015.

Kutchko, B.; Crandall, D.; Moore, J.; Gill, M.; McIntyre, D.; Rosenbaum, E.; Haljasmaa, I.; Strazisar, B.; Spaulding, R.; Harbert, W.; Benge, G.; Cunningham, E.; Lawrence, W.; DeBruijn, G.; Gardner, C. Field-Generated Foamed Cement: Initial Collection, Computed Tomography, and Analysis; NETL-TRS-5-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2015; p 48.

Kutchko, B.; Lopano, C.; Strazisar, B.; Hawthorne, S.; Miller, D.; Thaulow, N.; Zhang, L.; Guthrie, G. Impact of Oil Well Cement Exposed to H2S Saturated Fluid and Gas at High Temperatures and Pressures: Implications for Acid Gas Injection and Co-SequestrationJournal of Sustainable Energy Engineering 2015, 3, 80-101.

Rozman, K. A.; Kruzic, J. J.; Sears, J. S.; Hawk, J. A. Fatigue Crack Growth Mechanisms for Nickel-Base Superalloy Haynes 282 at 550-750°CJournal of Materials Engineering and Performance 2015, 24, 3699-3707.

Sengupta, A.; Beck, J.; Zhao, H.; Schatz, R.; Ziomek-Moroz, M.; Lvov, S. N. Corrosion Behavior of 13Cr Casing in Cement Simulated Pore SolutionElectrochemical Society Transactions 2015, 66, 13–36.

Spaulding, R.; Haljsmaa, I.; Gieger, C.; Kutchko, B.; Benge, G.; DeBruijn, G.; Shine, J.; Harbert, W. An Assessment of the Dynamic Modulus of Atmospherically Generated Foamed Cements; 2015 OTC 25776; Offshore Technology Conference, Houston, TX, May 4-7, 2015.

Improving Safety through Rapid Detection & In Situ Characterization

Levine, J. S.; Haljasmaa, I.; Lynn, R.; Shaffer, F.; Warzinski, R. P. Detection of Hydrates on Gas Bubbles during a Subsea Oil/Gas Leak; NETL-TRS-6-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA, 2015; p 44.

Shaffer, F.; Savas, Ö.; de Vera, G.; Lee, K. Determining the discharge rate from a submerged oil leak jet using ROV videoFlow Measurement and Instrumentation 2015, 43, 34–46.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Baled, O. H.; Xing, D.; Katz, H.; Tapriyal, D.; Gamwo, I. K.; Soong, Y.; Bamgbade, B. A.; Wu, Y.; Liu, K.; McHugh, M. A.; Enick, R. M. Viscosity of n-Hexadecane, n-Octadecane and n-Eicosane at Pressures up to 243 MPa and Temperatures up to 534 K. Journal of Chemical Thermodynamics 201472, 108–116.

Burgess, W. A.; Tapriyal, D.; Gamwo, I. K.; Wu, Y.; McHugh, M. A.; Enick, R. M. New Group-Contribution Parameters for the Calculation of PC-SAFT Parameters for Use at Pressures to 276 MPa and Temperatures to 533 KInd. Eng. Chem. Res. 2014, 53, 2520–2528.

Disenhof, C.; Mark-Moser, M.; Rose, K. The Gulf of Mexico Petroleum System Foundation for Science-Based Decision Making. Journal of Sustainable Energy Engineering. 2014, 2, 225–236.

Gamwo, I. K.; Tapriyal, D.; Enick, R. M.; McHugh, M. A.; Morreale, B. D. High Temperature, High Pressure Equation of State: Solidification of Hydrocarbons and Measurement of Krytox Oil Using Rolling-Ball Viscometer Validation; NETL-TRS-5-2014; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2014; p 48.

Nelson, J. R.; Bauer, J. R.; Rose, K. Assessment of Geographic Setting on Oil Spill Impact Severity in the United States – Insights from Two Key Spill Events in Support of Risk Assessment for Science-Based Decision Making. Journal of Sustainable Energy Engineering 2014, 2, 152–165.

Rose, K.; Aminzadeh, F.; Ghanem, R. G.; Thimmisetty, C.; Jabbari, N.; Khodabakhshnejad, A.; Disenhof, C. Risks and Impact Assessment for Deepwater and Ultra-Deepwater Gulf of Mexico Resources. Offshore Technology Conference, Houston, TX, May 5–8, 2014; p 17. DOI:10.4043/25364-MS.

Rose, K.; Guthrie, G. Annual Report:  Deepwater and Ultra-Deepwater; NETL-TRS-UDW-2013; NETL Technical Report Series, U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2013; p 37.

Improved Science-Base for Materials & Wellbore Integrity

Chen, T.; Nutter, J.; Hawk, J.; Liu, X. Corrosion Fatigue Crack Propagation of Oil-grade Nickel-base Alloy 718. Part 1: Effect of Corrosive EnvironmentCorros. Sci. 2014, 89, 146-153.

Feng, R.; Beck, J.; Lvov, S. N.; Ziomek-Moroz, M. Effects of Hydrogen Sulfide on the Corrosion Behavior of High Strength Steel in Alkaline SolutionsElectrochemical Society Transactions 2014, 61, 97–114.

Kutchko, B.; Moore, J.; Crandall, D.; Gill, M.; McIntyre, D.; Spaulding, R.; Strazisar, B.; Rosenbaum, E.; Haljasmaa, I.; Benge, G.; Cunningham, E.; DeBruijn, G.; Shine, J.; Gardner, C. Addendum 1 to Computed Tomography and Statistical Analysis of Bubble Size Distributions in Atmospheric-Generated Foamed Cement; NETL-TRS-2-2014; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2014; p 20.

NETL. NETL Boasts State-of-the-Art Capabilities for Cement ResearchE&P Focus2014, 1.

Rozman, K. A.; Ziomek-Moroz, M.; Bullard, S.; Kruzic, J. J.; Hawk, J. A. Localized Corrosion and Fatigue Behavior of Ultra-Deep Drilling Alloys; NETL-TRS-1-2014; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2014; p 28.

Ziomek-Moroz, M.; Hawk, J. A.; Collins, W. K.; Thodla, R.; Gui, F. The Consequence of Stress Intensity on Fatigue Crack Propagation in High-Strength Steels in Sour EnvironmentElectrochemical Society Transactions 2014, 61, 37–47.

Improving Safety through Rapid Detection & In Situ Characterization

Lynn, R. J.; Haljasmaa, I. V.; Shaffer, F.; Warzinski, R. P.; Levine, J. S. A Pitot tube system for obtaining water velocity profiles with millimeter resolution in devices with limited optical accessFlow Measurement and Instrumentation 2014, 40, 50–57.

Warzinski, R. P.; Lynn, R.; Haljasmaa, I.; Leifer, I.; Shaffer, F.; Anderson, B. J.; Levine, J. S. Dynamic morphology of gas hydrate on a methane bubble in water: Observations and implications for hydrate film models. Geophysical Research Letters 2014, 41, 6841–6847.

Zhao, L.; Boufadel, M. C.; Socolofsky, S. A.; Adams, E.; King, T.; Lee, K. Evolution of droplets in subsea oil and gas blowouts: Development and validation of the numerical model VDROP-JMarine Pollution Bulletin 2014, 83, 58–69.

Zhao, L.; Torlapati, J.; Boufadel, M. C.; King, T.; Robinson, B.; Lee, K. VDROP: A numerical model for the simulation of droplet formation from oils of various viscosities. Chem. Eng. J. 2014, 253, 93–106.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Baled, O. H.; Tapriyal, D.; Morreale, D. B.; Soong, Y.; Gamwo, I. K.; Krukonis, V.; Babatunde, A. B.; Wu, Y.; McHugh, A. M.; Burgess, A. W.; Enick, M. R. Exploratory Characterization of a Perfluoropolyether Oil as a Possible Viscosity Standard at Deepwater Production Conditions of 533 K and 241 MPaInt. J. Thermophys. 2013, 34, 1845–1864.

Bamgbade, B. A.; Wu, Y.; Baled, H. O.; Enick, R. M.; Burgess, W. A.; Tapriyal, D.; McHugh, M. A. Experimental density measurements of bis(2-ethylhexyl) phthalate at elevated temperatures and pressuresJ. Chem. Thermodyn. 2013, 63, 102–107.

Burgess, W. A.; Tapriyal, D.; Morreale, B. D.; Soong, Y.; Baled, O. H.; Enick, R. M.; Wu, Y.; Bamgbade, B. A.; McHugh, M. A. Volume-translated cubic EoS and PC-SAFT density models and a free volume-based viscosity model for hydrocarbons at extreme temperature and pressure conditionsFluid Phase Equilib 2013, 359, 38–44.

Wu, Y.; Bamgbade, B. A.; Baled, H.; Enick, R. M.; Burgess, W. A.; Tapriyal, D.; McHugh, M. A. Liquid Densities of Xylene Isomers and 2-Methylnaphthalene at Temperatures to 523 K and Pressures to 265 MPa: Experimental Determination and Equation of State ModelingIndustrial & Engineering Chemistry Research 2013, 52, 11732–11740.

Wu, Y.; Bamgbade, B. A.; Burgess, W. A.; Tapriyal, D.; Baled, H.; Enick, R. M.; McHugh, M. A. Effect of Isomeric Structures of Branched Cyclic Hydrocarbons on Densities and Equation of State Predictions at Elevated Temperatures and PressuresJ. Phys. Chem. B 2013, 117, 8821–8830.

Wu, Y.; Liu, K.; Bamgbade, A. B.; McHugh, A. M. Investigation on the solidification of several pure cyclic and aromatic hydrocarbons at pressures to 300 MPaFuel 2013, 111, 75–80.

Improved Science-Base for Materials & Wellbore Integrity

Chen, T. Pitting Corrosion and Corrosion Fatigue Crack Growth Behavior of Oil-Grade Alloy 718 in NaCl Solution. Ph.D. Dissertation, M.S. Thesis, Benjamin M. Statler College of Engineering and Mineral Resources, West Virginia University, Morgantown, WV, 2013.

Chen, T.; John, H.; Xu, J.; Lu, L.; Hawk, J. A.; Liu, X. Influence of Surface Modification on Pitting Corrosion Behavior of Nickel-base Alloy 718. Part 1: Effect of Machine Hammer PeeningCorros. Sci. 2013, 77, 230–245.

Kutchko, B.; Crandall, D.; Gill, M.; McIntyre, D.; Spaulding, R.; Strazisar, B.; Rosenbaum, E.; Haljasmaa, I.; Benge, G.; Cunningham, E.; DeBruijn, G.; Gardner, C. Computed Tomography and Statistical Analysis of Bubble Size Distributions in Atmospheric-Generated Foamed Cement; NETL-TRS-2-2013; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2013; p 28.

Nutter, J. S. Corrosion Fatigue Crack Propagation of Oil-Grade Alloy 718 in NaCl Solution. M.S. Thesis, Benjamin M. Statler College of Engineering and Mineral Resources, West Virginia University, Morgantown, WV, 2013.

Thodla, R.; Gui, F.; Hawk, J. A. Fatigue Crack Growth Rate of UD-165 in Sour Environments; NETL-TRS-3-2013; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2013; p 32.

Ziomek-Moroz, M.; Hawk, J. A.; Ramgopal, T.; Gui, F. Effect of Sour Environment pH on Crack Morphology in Ultra-High Strength Drilling Steel Under Cyclic StressECS Trans.2013, 50, 79–90.

Ziomek-Moroz, M.; Hawk, J. A.; Ramgopal, T.; Gui, F. Surface Studies of Ultra-high Strength Drilling Steel after Corrosion Fatigue in Simulated Sour EnvironmentECS Trans.2013, 45, 51–62

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Baled, H.; Enick, R. M.; Wu, Y.; McHugh, M. A.; Burgess, W. A.; Tapriyal, D.; Morreale, B. D. Prediction of hydrocarbon densities at extreme conditions using volume-translated SRK and PR equations of state fit to high temperature, high pressure PVT data. Fluid Phase Equilib. 2012, 317, 65–76.

Bamgbade, B. A.; Wu, Y.; Burgess, W. A.; McHugh, M. A. Experimental density and PC-SAFT modeling of Krytox® (perfluoropolyether) at pressures to 275 MPa and temperatures to 260°C. Fluid Phase Equilib. 2012332, 159–164.

Burgess, W.; Tapriyal, D.; Baled, H.; Enick, R. M.; Wu, Y.; McHugh, M. A.; Morreale, B. D. Prediction of fluid densities at extreme conditions using the
perturbed-chain SAFT equation correlated to high temperature, high pressure density data. Fluid Phase Equilib. 2012, 319 , 55–66.

Burgess, W. A.; Tapriyal, D.; Gamwo, I. K.; Morreale, B. D.; McHugh, M. A.; Enick, R. M. Viscosity Models Based on the Free Volume and Frictional Theories for Systems at Pressures to 276 MPa and Temperatures to 533 K. Ind. Eng. Chem. Res2012, 51, 16721–16733.

Graham, J.; Rose, K.; Bauer, J.; Disenhof, C.; Jenkins, C.; Nelson, J.; Ringo, C.; Sim, L.; VanAckeren, K. Integration of Spatial Data to Support Risk and Impact Assessments for Deep and Ultra-deepwater Hydrocarbon Activities in the Gulf of Mexico; NETL-TRS-4-2012; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV2012; p 36.

Leonardo Technologies, Inc. An Assessment of Current Deepwater Drilling and Production Equipment Failure Issues Related to Metallurgical Failure; Contract Number: C120-T008 URS RES; Task Number: 4000.4.605.920.006.211; 2012; pp 21.

Tapriyal, D.; Enick, R. M.; McHugh, M. A.; Gamwo, I. K.; Morreale, B. D. High Temperature, High Pressure Equation of State Density Correlations and Viscosity Correlations; NETL-TRS-1-2012; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2012; p 114.

Improved Science-Base for Materials & Wellbore Integrity

Chen, T.; John, H.; Xu, J.; Hawk, J. A.; Liu, X. Effects of Hammer Peening and Aging Treatment on Microstructure, Mechanical Properties and Corrosion Resistance of Oil-Grade Alloy 718. In Superalloys 2012: 12thInternational Symposium on Superalloys, Seven Springs Mountain Resort, Champion, PA, Sept 9-13, 2012; Huron, E. S., Reed, R. C., Hardy, M. C., Mills, M. J., Montero, R. E., Portello, P. D., Telesman, J., Eds.; TMS (The Minerals, Metals and Materials Society), John Wiley & Sons, Inc.: Hoboken, NJ, 2012; p 609–614.

Hudak, Jr., S. J.; Feiger, J. H.; Robledo, G. B.; Hawk, J. A. RPSEA Corrosion-Fatigue Performance of High-Strength Riser Materials in Seawater and Sour Brine Environments07121-1403; 07121‐1403.FINAL; Fatigue Performance of High-Strength Riser Materials Subjected to Sour Environments; Final Report Contract DEAC2607NT42677; 2012; pp 67.

Kutchko, B.; Pike, W.; Lang, K.; Strazisar, B.; Rose, K. An Assessment of Research Needs Related to Improving Primary Cement Isolation of Formations in Deep Offshore Wells; NETL-TRS-3-2012; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV2012; p 20.

Improving Safety through Rapid Detection & In Situ Characterization

Anderson, K.; Bhatnagar, G.; Crosby, D.; Hatton, G.; Manfield, P.; Kuzmicki, A.; Fenwick, N.; Pontaza, J.; Wicks, M.; Socolofsky, S.; Brady, C.; Svedeman, S.; Sum, A. K.; Koh, C.; Levine, J.; Warzinski, R. P.; Shaffer, F. Hydrates in the Ocean Beneath, Around, and Above Production Equipment. Energy Fuels 2012,26, 4167–4176. DOI: 10.1021/ef300261z.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Wu, Y.; Bamgbade, B.; Liu, K.; McHugh, M. A.; Baled, H.; Enick, R. M.; Burgess, W. A.; Tapriyal, D.; Morreale, B. D. Experimental measurements and equation of state modeling of liquid densities for long-chain n-alkanes at pressures to 265 MPa and temperatures to 523 KFluid Phase Equilib2011, 311, 17–24.

Improved Science-Base for Materials & Wellbore Integrity

Rozman, K. A. Corrosion and Fatigue of Oil Well Drilling Steels. M.S. Thesis, Oregon State University, Corvallis, OR, March 2011.

Ziomek-Moroz, M. Environmentally Assisted Cracking of Drill Pipe in Deep Drilling Oil and Natural Gas WellsJournal of Materials Engineering and Performance 2011, 21, 1061–1069. DOI: 10.1007/s11665-011-9956-6.

Ziomek-Moroz, M.; Bullard, S.; Rozman, K.; Kruzic, J. Effects of Inclusions in HSLA Carbon Steel on Pitting Corrosion in CaCl2Electrochemical Transactions 2011, 35, 11–20.

Improving Safety through Rapid Detection and In Situ Characterization

McNutt, M. K.; Camilli, R.; Crone, T. J.; Guthrie, G. D.; Hsieh, P. A.; Ryerson, T. B.; Savas, Ö.; Shaffer, F. Review of flow rate estimates of the Deepwater Horizon oil spill; Special Perspective Paper for the Proceedings of the National Academy of Sciences (PNAS), 2011.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

Liu, K.; Wu, Y.; McHugh, M. A.; Baled, H.; Enick, R. M.; Morreale, B. D. Equation of state modeling of high-pressure, high-temperature hydrocarbon density dataJ. of Supercrit. Fluids 2010, 55, 701–711.

Theme 1
Theme 2
Theme 3

Reducing Risks & Impacts Associated with Extreme Offshore Systems

2018

Duran, R.; Beron-Vera, F. J.; Olascoaga, M. J. Extracting quasi-Steady Lagrangian transport patterns from the ocean circulation: An application to the Gulf of MexicoScientific Reports 2018, 8, 10. DOI:10.1038/s41598-018-23121-y.

Duran, R.; Romeo, L.; Whiting, J.; Vielma, J.; Rose, K.; Bunn, A.; Bauer, J. Simulation of the 2003 Foss Barge – Point Wells Oil Spill:  A Comparison between BLOSOM and GNOME Oil Spill ModelsJournal of Marine Science and Engineering 2018, 6, 3. DOI: 10.3390/jmse6030104.

Feng, R.; Beck, J. R.; Hall, D. M.; Buyuksagis, A.; Ziomek-Moroz, M.; Lvov, S. N. Effects of CO2 and H2S on Corrosion of Martensitic Steels in Brines at Low Temperature. Corrosion 2018, 74, 276–287.

Gough M. K.; Beron-Vera, F. J.; Olascoaga, M. J.; Sheinbaum, J.; Jouenno, J.; Duran, R. Persistent Lagrangian transport patterns in the northwestern Gulf of Mexico. Submitted to J. Phys. Oceanography.

Krishnamurthy, N.; Maddali, S.; Verma, A.; Bruckman, L.; Carter, J.; French, R.; Romanov, V.; Hawk, J. A. Data Analytics for Alloy Qualification; NETL-PUB-21550; U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA, March 2018.

Mark-Moser, M.; Miller, R.; Rose, K.; Bauer, J.; Disenhof, C. Detailed Analysis of Geospatial Trends of Hydrocarbon Accumulations, Offshore Gulf of Mexico; NETL-TRS-13-2018; NETL Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2018; p 108. DOI: 10.18141/1461471.

Nelson, J. R.; Grubesic, T. H.; Sim, L.; Rose, K. A geospatial evaluation of oil spill impact potential on coastal tourism in the Gulf of MexicoComputers, Environment and Urban Systems 2018, 68, 26–36.

Thimmisetty, C.; Aminzadeh, F.; Rose, K.; Ghanem, R. Multiscale Stochastic Representations Using Polynomial Chaos Expansions with Gaussian Process CoefficientsData-Enabled Discovery and Applications 2018, 2, 16.

2017

Mollot, D.; Cedro, V.; Hawk, J. A.; Conrad, R.; Alman, D. E.; Powell, C. Rapid Design, Development and Deployment of Materials for Extreme Environments. Proceedings of the 2017 TechConnect World Innovation Conference & Expo, National Harbor, MD, May 14–17, 2017; pp. 367–370.

2016

Duran, R. Sub-Grid Parameterizations for Oceanic Oil-Spill Simulations. NETL-TRS-9-2016; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2016; p 36.

Baled, O. H.; Koronaios, P.; Xing, D.; Miles, R.; Tapriyal, D.; Gamwo, I. K.; Newkirk, M. S.; Mallepally, R. R.; McHugh, M.; Enick, M. R. High-temperature, high-pressure viscosity of n-octane and isooctaneFuel 2016, 164, 199.

Baled, O. H.; Tapriyal, D.; Gamwo, I. K.; Bamgbade, A. B.; McHugh, A. M.; Enick, M. R. Viscosity Measurements of Two Potential Deepwater Viscosity Standard Reference Fluids at High Temperature and High PressureJ. Chem. Eng. Data 2016, 61, 2712–2719.

Duran, R. Sub-Grid Parameterizations for Oceanic Oil-Spill Simulations; NETL-TRS-9-2016; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2016; p 36.

Montero, Jose & A. Chesney, Tanya & R. Bauer, Jennifer & Froeschke, John & Graham, Jim. (2016). Brown shrimp (Farfantepenaeus aztecus) density distribution in the Northern Gulf of Mexico: An approach using boosted regression trees. Fisheries Oceanography. 25. 337-348.

2015

Bamgbade, A. B.; Wu, Y.; Burgess, A. W.; Tapriyal, D.; Gamwo, I.; Baled, O. H.; Enick, M. R.; McHugh, A. M. High-Temperature, High-Pressure Volumetric Properties of Propane, Squalane, and Their Mixtures: Measurement and PC-SAFT ModelingInd. Eng. Chem. Res.2015, 54, 6804–6811.

Bamgbade, A. B.; Wu, Y.; Burgess, A. W.; Tapriyal, D.; Gamwo, I.; Baled, O. H.; Enick, M. R.; McHugh, A. M. Measurements and Modeling of High-Temperature, High-Pressure Density for Binary Mixtures of Propane with N-Decane and Propane with N-EicosaneJ. Chem. Thermodynamics 2015,84, 108–117.

Bauer, J. R.; Nelson, J.; Romeo, L.; Eynard, J.; Sim, L.; Halama, J.; Rose, K.; Graham, J. A Spatio-Temporal Approach to Analyze Broad Risks and Potential Impacts Associated with Uncontrolled Hydrocarbon Release Events in the Offshore Gulf of Mexico; NETL-TRS-2-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2015; p 60.

Bauer, J.; Rose, K. Variable Grid Method: an Intuitive Approach for Simultaneously Quantifying and Visualizing Spatial Data and Uncertainty. Transactions in GIS 2015, 19, 377–397.

Justman, D.; Rose, K.; Bauer, J.; Miller, R.; Vasylkivska, V. Evaluating the Mysteries of Seismicity in Oklahoma. U.S. Department of Energy, National Energy Technology Laboratory, 2015.

Mark-Moser, M.; Disenhof, C.; Rose, K. Gulf of Mexico Geology and Petroleum System: Overview and Literature Review in Support of Risk and Resource Assessments; NETL-TRS-4-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2015; p 28.

Nelson, J. R.; Grubesic, T. H.; Sim, L.; Rose, K. Geospatial approach for evaluating potential impacts and improving response readiness to hydrocarbon spills in the tourism sector. Submitted to Tourism Management, in review.

Nelson, J. R.; Grubesic, T. H.; Sim, L.; Rose, K.; Graham, J. Approach for Assessing Coastal Vulnerability to Oil Spills for Prevention and Readiness Using GIS and the Blowout and Spill Occurrence Model (BLOSOM)Ocean & Coastal Management 2015, 112, 1–11.

Romeo, L.; Rose, K.; Bauer, J. R.; Disenhof, C.; Sim, L.; Nelson, J.; Thimmisetty, C.; Mark-Moser, M.; Barkhurst, A. Adapting the National Energy Technology Laboratory’s Offshore Integrated Assessment Modeling Approach for the Offshore Arctic; NETL-TRS-3-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2015; p 40.

Sim, L.; Graham, J.; Rose, K.; Duran, R.; Nelson, J.; Umhoefer, J.; Vielma, J. Developing a Comprehensive Deepwater Blowout and Spill Model; NETL-TRS-9-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2015; p 44.

Sim, L.; Graham, J.; Rose, K.; Duran, R.; Nelson, J.; Umhoefer, J.; Vielma, J. Developing a Comprehensive Deepwater Blowout and Spill Model. Submitted to Environmental Modelling & Software, in review.

Socolofsky, S. A.; Adams, E. E.; Boufadel, M. C.; Aman, Z. M.; Johansen, Ø.; Konkel, W. J.; Lindo, D.; Mads, M. N.; North, E. W.; Paris-Limouzy, C. B.; Rasmussen, D.; Reed, M.; Rønningen, P.; Sim, L. H.; Uhrenholdt, T.; Anderson, K. G.; Cooper, C.; Nedwed, T. J. Intercomparison of Oil Spill Prediction Models for Accidental Blowout Scenarios with and without Subsea Chemical Dispersant Injection. Marine Pollution Bulletin2015, 96, 110–126.

2014

Baled, O. H.; Xing, D.; Katz, H.; Tapriyal, D.; Gamwo, I. K.; Soong, Y.; Bamgbade, B. A.; Wu, Y.; Liu, K.; McHugh, M. A.; Enick, R. M. Viscosity of n-Hexadecane, n-Octadecane and n-Eicosane at Pressures up to 243 MPa and Temperatures up to 534 K. Journal of Chemical Thermodynamics 201472, 108–116.

Burgess, W. A.; Tapriyal, D.; Gamwo, I. K.; Wu, Y.; McHugh, M. A.; Enick, R. M. New Group-Contribution Parameters for the Calculation of PC-SAFT Parameters for Use at Pressures to 276 MPa and Temperatures to 533 KInd. Eng. Chem. Res. 2014, 53, 2520–2528.

Disenhof, C.; Mark-Moser, M.; Rose, K. The Gulf of Mexico Petroleum System Foundation for Science-Based Decision Making. Journal of Sustainable Energy Engineering. 2014, 2, 225–236.

Gamwo, I. K.; Tapriyal, D.; Enick, R. M.; McHugh, M. A.; Morreale, B. D. High Temperature, High Pressure Equation of State: Solidification of Hydrocarbons and Measurement of Krytox Oil Using Rolling-Ball Viscometer Validation; NETL-TRS-5-2014; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2014; p 48.

Nelson, J. R.; Bauer, J. R.; Rose, K. Assessment of Geographic Setting on Oil Spill Impact Severity in the United States – Insights from Two Key Spill Events in Support of Risk Assessment for Science-Based Decision Making. Journal of Sustainable Energy Engineering 2014, 2, 152–165.

Rose, K.; Aminzadeh, F.; Ghanem, R. G.; Thimmisetty, C.; Jabbari, N.; Khodabakhshnejad, A.; Disenhof, C. Risks and Impact Assessment for Deepwater and Ultra-Deepwater Gulf of Mexico Resources. Offshore Technology Conference, Houston, TX, May 5–8, 2014; p 17. DOI:10.4043/25364-MS.

Rose, K.; Guthrie, G. Annual Report:  Deepwater and Ultra-Deepwater; NETL-TRS-UDW-2013; NETL Technical Report Series, U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2013; p 37.

2013

Baled, O. H.; Tapriyal, D.; Morreale, D. B.; Soong, Y.; Gamwo, I. K.; Krukonis, V.; Babatunde, A. B.; Wu, Y.; McHugh, A. M.; Burgess, A. W.; Enick, M. R. Exploratory Characterization of a Perfluoropolyether Oil as a Possible Viscosity Standard at Deepwater Production Conditions of 533 K and 241 MPaInt. J. Thermophys. 2013, 34, 1845–1864.

Bamgbade, B. A.; Wu, Y.; Baled, H. O.; Enick, R. M.; Burgess, W. A.; Tapriyal, D.; McHugh, M. A. Experimental density measurements of bis(2-ethylhexyl) phthalate at elevated temperatures and pressuresJ. Chem. Thermodyn. 2013, 63, 102–107.

Burgess, W. A.; Tapriyal, D.; Morreale, B. D.; Soong, Y.; Baled, O. H.; Enick, R. M.; Wu, Y.; Bamgbade, B. A.; McHugh, M. A. Volume-translated cubic EoS and PC-SAFT density models and a free volume-based viscosity model for hydrocarbons at extreme temperature and pressure conditionsFluid Phase Equilib 2013, 359, 38–44.

Wu, Y.; Bamgbade, B. A.; Baled, H.; Enick, R. M.; Burgess, W. A.; Tapriyal, D.; McHugh, M. A. Liquid Densities of Xylene Isomers and 2-Methylnaphthalene at Temperatures to 523 K and Pressures to 265 MPa: Experimental Determination and Equation of State ModelingIndustrial & Engineering Chemistry Research 2013, 52, 11732–11740.

Wu, Y.; Bamgbade, B. A.; Burgess, W. A.; Tapriyal, D.; Baled, H.; Enick, R. M.; McHugh, M. A. Effect of Isomeric Structures of Branched Cyclic Hydrocarbons on Densities and Equation of State Predictions at Elevated Temperatures and PressuresJ. Phys. Chem. B 2013, 117, 8821–8830.

Wu, Y.; Liu, K.; Bamgbade, A. B.; McHugh, A. M. Investigation on the solidification of several pure cyclic and aromatic hydrocarbons at pressures to 300 MPaFuel 2013, 111, 75–80.

2012

Baled, H.; Enick, R. M.; Wu, Y.; McHugh, M. A.; Burgess, W. A.; Tapriyal, D.; Morreale, B. D. Prediction of hydrocarbon densities at extreme conditions using volume-translated SRK and PR equations of state fit to high temperature, high pressure PVT data. Fluid Phase Equilib. 2012, 317, 65–76.

Bamgbade, B. A.; Wu, Y.; Burgess, W. A.; McHugh, M. A. Experimental density and PC-SAFT modeling of Krytox® (perfluoropolyether) at pressures to 275 MPa and temperatures to 260°C. Fluid Phase Equilib. 2012332, 159–164.

Burgess, W.; Tapriyal, D.; Baled, H.; Enick, R. M.; Wu, Y.; McHugh, M. A.; Morreale, B. D. Prediction of fluid densities at extreme conditions using the
perturbed-chain SAFT equation correlated to high temperature, high pressure density data. Fluid Phase Equilib. 2012, 319 , 55–66.

Burgess, W. A.; Tapriyal, D.; Gamwo, I. K.; Morreale, B. D.; McHugh, M. A.; Enick, R. M. Viscosity Models Based on the Free Volume and Frictional Theories for Systems at Pressures to 276 MPa and Temperatures to 533 K. Ind. Eng. Chem. Res2012, 51, 16721–16733.

Graham, J.; Rose, K.; Bauer, J.; Disenhof, C.; Jenkins, C.; Nelson, J.; Ringo, C.; Sim, L.; VanAckeren, K. Integration of Spatial Data to Support Risk and Impact Assessments for Deep and Ultra-deepwater Hydrocarbon Activities in the Gulf of Mexico; NETL-TRS-4-2012; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV2012; p 36.

Leonardo Technologies, Inc. An Assessment of Current Deepwater Drilling and Production Equipment Failure Issues Related to Metallurgical Failure; Contract Number: C120-T008 URS RES; Task Number: 4000.4.605.920.006.211; 2012; pp 21.

Tapriyal, D.; Enick, R. M.; McHugh, M. A.; Gamwo, I. K.; Morreale, B. D. High Temperature, High Pressure Equation of State Density Correlations and Viscosity Correlations; NETL-TRS-1-2012; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2012; p 114.

2011

Wu, Y.; Bamgbade, B.; Liu, K.; McHugh, M. A.; Baled, H.; Enick, R. M.; Burgess, W. A.; Tapriyal, D.; Morreale, B. D. Experimental measurements and equation of state modeling of liquid densities for long-chain n-alkanes at pressures to 265 MPa and temperatures to 523 KFluid Phase Equilib2011, 311, 17–24.

2010

Liu, K.; Wu, Y.; McHugh, M. A.; Baled, H.; Enick, R. M.; Morreale, B. D. Equation of state modeling of high-pressure, high-temperature hydrocarbon density dataJ. of Supercrit. Fluids 2010, 55, 701–711.

Improved Science-Base for Materials & Wellbore Integrity

2016

Beck, J.; Fung, R.; Hall, D.; Buyuksagis, A.; Ziomek-Moroz, M.; Lvov, S. Effects of H2S and CO2 on Cement/Casing Interface Corrosion Integrity for Cold Climate Oil and Gas Well ApplicationsElectrochemical Society Transactions 2016, 72, 107–122.

Carson, C.; Levine, J. The Finite Body Triangulation: Algorithms, Subgraphs, Homogeneity Estimation and ApplicationJournal of Microscopy 2016, 263, 268–279.

Feng, R.; Beck, J. R.; Ziomek-Moroz, M.; Lvov, S. Electrochemical Corrosion of Ultra-High Strength Carbon Steel in Alkaline Brines Containing Hydrogen SulfideElectrochimica Acta 2016, 212, 998–1009.

Glosser, D.; Kutchko, B.; Benge, G.; Crandall D.; Ley, M. T. Relationship Between Operational Variables, Fundamental Physics and Foamed Cement Properties in Lab and Field Generated Foamed Cement SlurriesJournal of Petroleum Science and Engineering 2016, 145, 66–76.

Thodla, R.; Cao, L.; Hawk, J.; Ziomek-Moroz, M. Relationship between Localized Corrosion and Stress Corrosion Cracking of Nickel Based Alloys in HPHT Oil and Gas Environments; Paper No. 7113; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Thodla, R.; Cao, L.; Hawk, J.; Ziomek-Moroz, M. Sour Service Fatigue and Fracture Behavior of High Strength Steels; Paper No. 7183; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Ziomek-Moroz, M.; Feng, R.; Beck, J. R.; Hall, D. M.; Buyuksagis, A.; Lvov, S. N. Effects of CO2 and H2S on Corrosion of Martensitic Steels in NaCl at Low Temperature; Paper No. 7659; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

Ziomek-Moroz, M.; Feng, R.; Beck, J. R.; Hall, D. M.; Wolfe, I.; Buyuksagis, A.; Lvov, S. N. Corrosion Behavior of Ultra-high Strength Drilling Steel in Alkaline Brines Containing Hydrogen Sulfide at High Temperature; Paper No. 7657; NACE International Corrosion 2016 Conference and Expo; NACE: Houston, TX, 2016.

2015

Chen, T.; Nutter, J.; Hawk, J. A.; Liu, X. Corrosion Fatigue Crack Propagation of Oil-grade Nickel-base Alloy 718. Part 2: Effect of Aging TreatmentCorros. Sci. 2015, 98, 280–290.

Chen, Ting & John, Hendrik & Xu, Jing & Lu, Qiu & Hawk, Jeffrey & Liu, Xingbo. (2014). Influence of surface modifications on pitting corrosion behavior of nickel-base alloy 718. Part 2: Effect of aging treatment. Corrosion Science. 78. 151–161.

Feng, R.; Beck, J. R.; Hall, D.; Ziomek-Moroz, M.; Lvov, S. N. Corrosion Behavior of 13Cr Casing Steel in Cement-Synthetic Pore Solution Exposed to High Pressure CO2 and H2SElectrochemical Society Transactions 2015, 69, 27–40.

Kutchko, B.; Crandall, D.; Moore, J.; Gieger, C.; Gill, M.; Haljasmaa, I.; Spaulinding, R.; Harbert, W.; Mergaman, A.; Dalton, L.; Rosenbaum, E.; McIntyre, D.; Benge, G.; Buford, C.; Shine, J. Assessment of Field-Generated Foamed Cement; OTC-25994-MS; Offshore Technology Conference, Houston, TX, May 4-7, 2015.

Kutchko, B.; Crandall, D.; Moore, J.; Gill, M.; McIntyre, D.; Rosenbaum, E.; Haljasmaa, I.; Strazisar, B.; Spaulding, R.; Harbert, W.; Benge, G.; Cunningham, E.; Lawrence, W.; DeBruijn, G.; Gardner, C. Field-Generated Foamed Cement: Initial Collection, Computed Tomography, and Analysis; NETL-TRS-5-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2015; p 48.

Kutchko, B.; Lopano, C.; Strazisar, B.; Hawthorne, S.; Miller, D.; Thaulow, N.; Zhang, L.; Guthrie, G. Impact of Oil Well Cement Exposed to H2S Saturated Fluid and Gas at High Temperatures and Pressures: Implications for Acid Gas Injection and Co-SequestrationJournal of Sustainable Energy Engineering 2015, 3, 80-101.

Rozman, K. A.; Kruzic, J. J.; Sears, J. S.; Hawk, J. A. Fatigue Crack Growth Mechanisms for Nickel-Base Superalloy Haynes 282 at 550-750°CJournal of Materials Engineering and Performance 2015, 24, 3699-3707.

Sengupta, A.; Beck, J.; Zhao, H.; Schatz, R.; Ziomek-Moroz, M.; Lvov, S. N. Corrosion Behavior of 13Cr Casing in Cement Simulated Pore SolutionElectrochemical Society Transactions 2015, 66, 13–36.

Spaulding, R.; Haljsmaa, I.; Gieger, C.; Kutchko, B.; Benge, G.; DeBruijn, G.; Shine, J.; Harbert, W. An Assessment of the Dynamic Modulus of Atmospherically Generated Foamed Cements; 2015 OTC 25776; Offshore Technology Conference, Houston, TX, May 4-7, 2015.

2014

Chen, T.; Nutter, J.; Hawk, J.; Liu, X. Corrosion Fatigue Crack Propagation of Oil-grade Nickel-base Alloy 718. Part 1: Effect of Corrosive EnvironmentCorros. Sci. 2014, 89, 146-153.

Feng, R.; Beck, J.; Lvov, S. N.; Ziomek-Moroz, M. Effects of Hydrogen Sulfide on the Corrosion Behavior of High Strength Steel in Alkaline SolutionsElectrochemical Society Transactions 2014, 61, 97–114.

Kutchko, B.; Moore, J.; Crandall, D.; Gill, M.; McIntyre, D.; Spaulding, R.; Strazisar, B.; Rosenbaum, E.; Haljasmaa, I.; Benge, G.; Cunningham, E.; DeBruijn, G.; Shine, J.; Gardner, C. Addendum 1 to Computed Tomography and Statistical Analysis of Bubble Size Distributions in Atmospheric-Generated Foamed Cement; NETL-TRS-2-2014; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2014; p 20.

NETL. NETL Boasts State-of-the-Art Capabilities for Cement ResearchE&P Focus2014, 1.

Rozman, K. A.; Ziomek-Moroz, M.; Bullard, S.; Kruzic, J. J.; Hawk, J. A. Localized Corrosion and Fatigue Behavior of Ultra-Deep Drilling Alloys; NETL-TRS-1-2014; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2014; p 28.

Ziomek-Moroz, M.; Hawk, J. A.; Collins, W. K.; Thodla, R.; Gui, F. The Consequence of Stress Intensity on Fatigue Crack Propagation in High-Strength Steels in Sour EnvironmentElectrochemical Society Transactions 2014, 61, 37–47.

2013

Chen, T. Pitting Corrosion and Corrosion Fatigue Crack Growth Behavior of Oil-Grade Alloy 718 in NaCl Solution. Ph.D. Dissertation, M.S. Thesis, Benjamin M. Statler College of Engineering and Mineral Resources, West Virginia University, Morgantown, WV, 2013.

Chen, T.; John, H.; Xu, J.; Lu, L.; Hawk, J. A.; Liu, X. Influence of Surface Modification on Pitting Corrosion Behavior of Nickel-base Alloy 718. Part 1: Effect of Machine Hammer PeeningCorros. Sci. 2013, 77, 230–245.

Kutchko, B.; Crandall, D.; Gill, M.; McIntyre, D.; Spaulding, R.; Strazisar, B.; Rosenbaum, E.; Haljasmaa, I.; Benge, G.; Cunningham, E.; DeBruijn, G.; Gardner, C. Computed Tomography and Statistical Analysis of Bubble Size Distributions in Atmospheric-Generated Foamed Cement; NETL-TRS-2-2013; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2013; p 28.

Nutter, J. S. Corrosion Fatigue Crack Propagation of Oil-Grade Alloy 718 in NaCl Solution. M.S. Thesis, Benjamin M. Statler College of Engineering and Mineral Resources, West Virginia University, Morgantown, WV, 2013.

Thodla, R.; Gui, F.; Hawk, J. A. Fatigue Crack Growth Rate of UD-165 in Sour Environments; NETL-TRS-3-2013; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2013; p 32.

Ziomek-Moroz, M.; Hawk, J. A.; Ramgopal, T.; Gui, F. Effect of Sour Environment pH on Crack Morphology in Ultra-High Strength Drilling Steel Under Cyclic StressECS Trans.2013, 50, 79–90.

Ziomek-Moroz, M.; Hawk, J. A.; Ramgopal, T.; Gui, F. Surface Studies of Ultra-high Strength Drilling Steel after Corrosion Fatigue in Simulated Sour EnvironmentECS Trans.2013, 45, 51–62

2012

Chen, T.; John, H.; Xu, J.; Hawk, J. A.; Liu, X. Effects of Hammer Peening and Aging Treatment on Microstructure, Mechanical Properties and Corrosion Resistance of Oil-Grade Alloy 718. In Superalloys 2012: 12thInternational Symposium on Superalloys, Seven Springs Mountain Resort, Champion, PA, Sept 9-13, 2012; Huron, E. S., Reed, R. C., Hardy, M. C., Mills, M. J., Montero, R. E., Portello, P. D., Telesman, J., Eds.; TMS (The Minerals, Metals and Materials Society), John Wiley & Sons, Inc.: Hoboken, NJ, 2012; p 609–614.

Hudak, Jr., S. J.; Feiger, J. H.; Robledo, G. B.; Hawk, J. A. RPSEA Corrosion-Fatigue Performance of High-Strength Riser Materials in Seawater and Sour Brine Environments07121-1403; 07121‐1403.FINAL; Fatigue Performance of High-Strength Riser Materials Subjected to Sour Environments; Final Report Contract DEAC2607NT42677; 2012; pp 67.

Kutchko, B.; Pike, W.; Lang, K.; Strazisar, B.; Rose, K. An Assessment of Research Needs Related to Improving Primary Cement Isolation of Formations in Deep Offshore Wells; NETL-TRS-3-2012; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV2012; p 20.

2011

Rozman, K. A. Corrosion and Fatigue of Oil Well Drilling Steels. M.S. Thesis, Oregon State University, Corvallis, OR, March 2011.

Ziomek-Moroz, M. Environmentally Assisted Cracking of Drill Pipe in Deep Drilling Oil and Natural Gas WellsJournal of Materials Engineering and Performance 2011, 21, 1061–1069. DOI: 10.1007/s11665-011-9956-6.

Ziomek-Moroz, M.; Bullard, S.; Rozman, K.; Kruzic, J. Effects of Inclusions in HSLA Carbon Steel on Pitting Corrosion in CaCl2Electrochemical Transactions 2011, 35, 11–20.

Improving Safety through Rapid Detection & In Situ Characterization

2018

Mark-Moser, M.; Miller, R.; Rose, K.; Bauer, J.; Disenhof, C. Detailed Analysis of Geospatial Trends of Hydrocarbon Accumulations, Offshore Gulf of Mexico; NETL-TRS-13-2018; NETL Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2018; p 108. DOI: 10.18141/1461471.

Rose, K.; Bauer, J. R.; Mark-Moser, M. Subsurface Trend Analysis, a Multi-Variate Geospatial Approach for Subsurface Evaluation and Uncertainty Reduction. Submitted to Interpretation, in review.

2016

Tost, B.; Rose, K.; Aminzadeh, F.; Ante, M. A.; Huerta, N. Kick Detection at the Bit: Early Detection via Low Cost Monitoring; NETL-TRS-2-2016; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Albany, OR, 2016; p. 48.

2015

Levine, J. S.; Haljasmaa, I.; Lynn, R.; Shaffer, F.; Warzinski, R. P. Detection of Hydrates on Gas Bubbles during a Subsea Oil/Gas Leak; NETL-TRS-6-2015; EPAct Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Pittsburgh, PA, 2015; p 44.

Shaffer, F.; Savas, Ö.; de Vera, G.; Lee, K. Determining the discharge rate from a submerged oil leak jet using ROV video. Flow Measurement and Instrumentation2015, 43, 34–46.

2014

Lynn, R. J.; Haljasmaa, I. V.; Shaffer, F.; Warzinski, R. P.; Levine, J. S. A Pitot tube system for obtaining water velocity profiles with millimeter resolution in devices with limited optical access. Flow Measurement and Instrumentation 2014, 40, 50–57.

Warzinski, R. P.; Lynn, R.; Haljasmaa, I.; Leifer, I.; Shaffer, F.; Anderson, B. J.; Levine, J. S. Dynamic morphology of gas hydrate on a methane bubble in water: Observations and implications for hydrate film models. Geophysical Research Letters 2014, 41, 6841–6847.

Zhao, L.; Boufadel, M. C.; Socolofsky, S. A.; Adams, E.; King, T.; Lee, K. Evolution of droplets in subsea oil and gas blowouts: Development and validation of the numerical model VDROP-J. Marine Pollution Bulletin 2014, 83, 58–69.

Zhao, L.; Torlapati, J.; Boufadel, M. C.; King, T.; Robinson, B.; Lee, K. VDROP: A numerical model for the simulation of droplet formation from oils of various viscosities. Chem. Eng. J. 2014, 253, 93–106.

2012

Anderson, K.; Bhatnagar, G.; Crosby, D.; Hatton, G.; Manfield, P.; Kuzmicki, A.; Fenwick, N.; Pontaza, J.; Wicks, M.; Socolofsky, S.; Brady, C.; Svedeman, S.; Sum, A. K.; Koh, C.; Levine, J.; Warzinski, R. P.; Shaffer, F. Hydrates in the Ocean Beneath, Around, and Above Production Equipment. Energy Fuels 2012, 26, 4167–4176. DOI: 10.1021/ef300261z.

2011

McNutt, M. K.; Camilli, R.; Crone, T. J.; Guthrie, G. D.; Hsieh, P. A.; Ryerson, T. B.; Savas, Ö.; Shaffer, F. Review of flow rate estimates of the Deepwater Horizon oil spill; Special Perspective Paper for the Proceedings of the National Academy of Sciences (PNAS), 2011.

Research Products