Your browser is not recommended for EDX, we suggest using the latest version of Google Chrome.

Development of technology for in situ oil shale processes. [Operation of 10-ton retort, 150-ton retort, small high-pressure batch retort, and simulated-overburden retort; development of mathematical retorting model]

License(s):

Other (Open)

Laboratory and pilot plant research is being conducted by the Bureau of Mines at the Laramie Energy Research Center to support the development of in situ retorting processes for treating oil shale. Results of this research indicate that fairly wide ranges of gas velocity and oxygen concentration may be used to produce an optimum oil yield. Retorting advance rate increases with increasing oxygen flux, but maximum oil yield does not occur at the maximum advance rate. Oils produced by in situ retorting of oil shale will have lower pour points, higher API gravities, and a higher percentage of lower boiling distillate fractions than will oils produced by many aboveground retorting processes. Total system gas pressure has an effect on oil yield, and overburden pressure decreases the permeability of a bed of broken oil shale during retorting.

Followers: 0

Citation (Click to Copy)

Data and Resources

    Gathering Resources...

Keywords

Additional Info

Field Value
Last Updated September 29, 2016, 17:16 (LMT)
Created September 29, 2016, 17:16 (LMT)
Citation Carpenter, H.C. Sohns, H.W. ---- Roy Long, Development of technology for in situ oil shale processes. [Operation of 10-ton retort, 150-ton retort, small high-pressure batch retort, and simulated-overburden retort; development of mathematical retorting model], 2016-09-29, https://edx.netl.doe.gov/dataset/development-of-technology-for-in-situ-oil-shale-processes-operation-of-10-ton-retort-150-ton-ret
Netl Product yes
Poc Email Roy.long@netl.doe.gov
Point Of Contact Roy Long
Program Or Project KMD
Publication Date 1974-4-1