This is the seventh in a series of quarterly reports describing the activities performed for this project. Our analyses of Hot Gas Stream Cleanup (HGCU) ashes and descriptions of filter performance address aspects of filter operation that are apparently linked to the characteristics of the collected ash or the performance of the ceramic barrier filter elements. Task 1 is designed to generate a data base of the key characteristics of ashes collected from operating advanced particle filters (APFs) and to relate these ash properties to the operation and performance of these filters. Task 2 concerns testing and failure analysis of ceramic filter elements. Under Task 1 during the past quarter, we received and analyzed a hopper ash sample from the Transport Reactor Demonstration Unit (TRDU) located at the University of North Dakota`s Energy and Environmental Research Center (UNDEERC). We also received six ash samples from the Ahlstrom 10 MWt Pressurized Fluidized Circulating Fluid Bed (PCFB) facility located at Karhula, Finland. We selected one of the filter cake ashes from this batch of samples for detailed analyses. We continued our work on the HGCU data base we are constructing in Microsoft Access{reg_sign}. We have been entering a variety of information into the data base, including numerical values, short or long text entries, and photographs. Task 2 efforts during the past quarter focused on hoop tensile testing of Schumacher FT20 and Refractron candle filter elements removed from the Karhula APF after {approximately}540 hours of service.