Brief progress reports are presented for the following tasks: development and demonstration of a practical electric downhole steam generator for thermal recovery of heavy oil and tar; wetting behavior of selected crude oil/brine/rock systems; coal gasification, power generation and product market study; the impact of leachate from Clean Coal Technology waste on the stability of clay liners; investigation of coprocessing heavy oil, automobile shredder residue, and coal; injection into coal seams for simultaneous CO[sub 2] mitigation and enhanced recovery of coalbed methane; optimization of carbonizer operations in the FMC Coke Process; chemical sensor and field screening technology development; demonstration of the Koppleman ''Series C''Process using a batch test unit with Powder River Basin coal as feed; remote chemical sensor development; market assessment and technical feasibility study of PFBC ash use; solid state NMR analysis of naturally and artificially matured kerogens; contained recovery of oily wastes field demonstration with Bell Lumber and Pole; ''B Series''pilot plant test; in-situ treatment of manufactured gas plant contaminated soils; development and demonstration of a wood-fired gas turbine system; solid state NMR analysis of Mowry formation shale from different sedimentary basins; acid-mine drainage prevention, control, and treatment development for the Stockett/Sand Coulee area; and PERF dispersion modeling project.