This quarterly report is broken down between design and the status of the fabrication work being performed. The design section is divided between the following sections: Site layout, foundation design, structural design, piping design, pulse combustor components, and electrical & instrumentation design. As reported in the last quarterly report the location area of the PAFBC in the Clemson Energy Facility was inspected with a view to finalize the layout of the PAFBC plant. Some adjustments were made to the layout to accommodate Clemson University`s requirements and the available space. The most important changes are that the boiler and economizer were relocated in the structure above ground level in order to reduce the size of the footprint of the plant. Figure 1 is the plan view of the current layout. Figures 2 through 6 present different elevation views of the layout. The design of foundations for the entire plant is currently being executed by Industra Engineers Inc. of Greenville, SC. The different weights of various equipment located close to each other precludes the provision of independent foundations for each piece of equipment. One monolithic foundation platform for the whole area proves to be more economical for the current layout. In this quarter the design of the plant structures was completed. The drawings were sent out for expert review and approval. The drawings at this stage present complete structural and platform layout requirements. Changes will be made to various structural members based on the structural review and then detailed drawings of joint design and fabrication cutting plans will be prepared and issued for fabrication.