Basal Cambrian project GIS files were created based on outputs from the project’s geologic model. These files represent generalized characteristics of the Cambro-Ordovician...
The submission is three electronic reports (e-reports) produced by Terra Tek, a former Schlumberger company, for and under the oversight of the Southwest Regional Partnership on...
Ground-based transient electromagnetic (TEM) data were acquired in selected locations around Belle Creek, Montana to define the resistivity structure of the near surface. Data...
This collection of documents was collected and prepared simultaneously with the geospatial data collection Carbon Storage Open Database: Morkner, P., Creason, C., Sabbatino, M.,...
Lookup table of pressures and saturations from injection layer of FutureGen 2.0 reservoir model developed using the STOMP simulator. A 20-year injection period with CO2...
Computed tomography and core logger data described in Technical Report "Computed Tomography Scanning and Geophysical Measurements of the T.R. McMillen #2 Core" by R. Schmitt et...
High resolution micro-computed tomography images of sandstone from the Mt. Simon formation at different depths. These images provide an insight into the pore structure of the...
This submission consists of various well test reports conducted on the Danielson 33-17 well in the Kevin Dome project conducted by BSCSP. There are reports and data in this...
The attached reports and data sets provide information on well testing conducted at Wallewein 22-1 as part of the Kevin Dome project outside of Sunburst, Montana. There is...
Distributed Temperature Sensing data files collected during the SECARB project from Detailed Area of Study wells (CFU F-1, F-2, F-3) at Cranfield oil site in Mississippi....
Core photos and analysis collected from Cranfield oilfield in southwest Mississippi as part of SECARB project. Cores are from CFU31F-1, CFU31F-2, and CFU31F-3 wells in the...
Borehole gravity measurements obtained during the SECARB project at the Cranfield oil site in Mississippi from CFU31-F2 and CFU31-F3 wells. Data was used to calculate density...
Thin sections, sedimentary graphic logs, and XRD results from CFU31-F2 and CFU31-F3 wells. Data collected as part of geologic characterization phase of SECARB project at the...
Vertical Seismic Profile data collected in 2009 and 2010 as part of SECARB Phase III Early Test at Cranfield oilfield in Mississippi to determine CO2 induced change from seismic...
Borehole logs from the SECARB project at the Cranfield oil site in Franklin, Mississippi . Well logs are a part of the geologic characterization phase of SECARB; CFU 31F-1, CFU...
Daily drilling reports and surveys, deviation data, and gyroscopic surveys from wells CFU31F1, CFU31F2, and CFU31F3 collected from Cranfield oil field in Mississippi as part of...
Hydrotest, gas composition, injection fluid, mass spectrometer, and U-tube gas sample analysis data gathered during SECARB project at Cranfield oil site in Mississippi....